fuel pressure regulator
Description
i need you to do some reserach small reserach about pressure regulator for fuel tank or pump/turbopump to increase the pressure fuel before injection for the same engine scramjet engine the report you did is the same use it but add the pressure regulator that you found with the numbers cost etc with everything a reserch and a picture in addition a pump pressure that can increase the prussure to go through the flow + injector nozzle to reduce the droplet size a reserch and a picture attached refrence attached the report use it and add to it and companed them in one file
Slide 1 of 1
-
attachment_1attachment_1
Unformatted Attachment Preview
Fuel Tank
The fuel supply system will be made up of kerosene or jet-a1 fuel tanks and a pressure regulator.
The kerosene fuel tank will be supplied by European Motor Products Incorporated (EMPI Inc.,
USA) and will be made up of a 28-liter tank capable of providing enough fuel with a mass flow
rate of 0.2828 kg/s. The tank will offer safe, portable, and cost-effective kerosene fuel. Average
cost for 10-liter kerosene fuel storage tank can be around $300 and is available at the companyÊwebsite, https://empius.com. The selected kerosene storage tank is about 10*40 in dimensions
and should be able to hold enough fuel to carry out two test runs. However, the 42-liter capacity
kerosene storage fuel tanks will be able to inject enough fuel for both test runs if needed. A clear
advantage of these tanks is that they can easily be placed on the lifted trailer while leaving
enough room for the rest of the assembly which includes the fuel injector plates (Li et al., 2015).
The kerosene fuel will have a constant fuel mass flow rate (?f) of 2 g/s, and this was determined
by using the stoichiometric fuel to air ratio as well as the airàmass flow rate.
High performance Kerosene Fuel Tank by EMPI Inc.
Reference
Li, J., Song, W., Han, X., Fu, Q., Niu, J., & Xue, W. (2015). Design and experiments of the fuel
control method for the scramjet engine. Sadhana, 40, 155-171.
Purchase answer to see full
attachment
The fuel supply system will be made up of kerosene or jet-a1 fuel tanks and a pressure regulator.
The kerosene fuel tank will be supplied by European Motor Products Incorporated (EMPI Inc.,
USA) and will be made up of a 28-liter tank capable of providing enough fuel with a mass flow
rate of 0.2828 kg/s. The tank will offer safe, portable, and cost-effective kerosene fuel. Average
cost for 10-liter kerosene fuel storage tank can be around $300 and is available at the companyÊwebsite, https://empius.com. The selected kerosene storage tank is about 10*40 in dimensions
and should be able to hold enough fuel to carry out two test runs. However, the 42-liter capacity
kerosene storage fuel tanks will be able to inject enough fuel for both test runs if needed. A clear
advantage of these tanks is that they can easily be placed on the lifted trailer while leaving
enough room for the rest of the assembly which includes the fuel injector plates (Li et al., 2015).
The kerosene fuel will have a constant fuel mass flow rate (?f) of 2 g/s, and this was determined
by using the stoichiometric fuel to air ratio as well as the airàmass flow rate.
High performance Kerosene Fuel Tank by EMPI Inc.
Reference
Li, J., Song, W., Han, X., Fu, Q., Niu, J., & Xue, W. (2015). Design and experiments of the fuel
control method for the scramjet engine. Sadhana, 40, 155-171.
Purchase answer to see full
attachment
Explanation & Answer:
1 Paper
User generated content is uploaded by users for the purposes of learning and should be used following our honor code & terms of service.
Have a similar assignment? "Place an order for your assignment and have exceptional work written by our team of experts, guaranteeing you A results."
